App open ads

App open ads resemble interstitial ads but show when the user soft launches or cold starts the app:

Cold start : creating new session of the app on device

• the app is not in device memory
• splash/loading screen required

Soft launch : bringing the app from background to foreground, or activating the phone when the app is in foreground mode

• the app is suspended in memory
• splash/loading screen required

Best practices

• Display a splash/loading screen before you show the app open ad. Do this no matter how you place the ad.
  • Include a call-out to the user that tells them they will see an ad in the Splash/Loading screen.
    • For example: “Watch an ad from their sponsor while the app loads.”
  • Ensure that the user is not exposed to actual app content before the ad shows. The correct sequence is: splash/loading screen ⇒ app open ad ⇒ app content.
• Ensure that AppLovin’s SDK initializes before you load an app open ad.
• When an app open ad is not yet loaded (i.e. on cold start), load it first. Load any other ad formats later so that you avoid loading them in parallel with the app open ad.
  • Loading multiple ad formats in parallel is not good for the device’s resources or for ad demand SDKs.
• To avoid over-exposing users to App Open Ads, AppLovin suggests that you consider the following strategies:
  • Use a frequency cap that you manage outside AppLovin. This way you have full control over when the ads will serve.
  • Implement a cool down period based on user behavior in the app. For example: don’t show an ad during soft launch for some period of time before you show one again, or show an ad during every other soft launch.
  • Wait until new users open the app and use it a few times before you show the first App Open Ad.

Retention

Always consider retention when you implement the App Open Ad format.

For app open ads, you can choose from a variety of implementation strategies.

AppLovin recommends that you test by using one or more of the techniques described below. Each application has a unique configuration that allows it to maximize revenue without impacting retention or time spent in the app. User behavior and engagement may change, so AppLovin recommends that you retest your App Open Ads strategies often. Some implementation techniques you may use to test App Open Ads include:

• Show to the right users. Examples of this technique include:
  • Wait a variable number of days after initial install to show on cold start.
  • Show to users that had a session in the last several days.
  • Show to users that reached certain criteria in the app. For example they completed a certain level, they opened the app a certain number of times, or they do not engage with Rewarded offerings.
• Avoid over-exposing ads to users. Examples of this technique include:
  • Do not show an ad on every opportunity. Instead, show on every other, third, or fourth ad opportunity.
  • Only show an ad if the user backgrounds the app for a certain amount of time (i.e. 30 seconds, 2 minutes, 15 minutes).
  • If you show a cold start ad, do not show soft launch app open ads or interstitials for a certain amount of time.
  • Use a frequency cap. If possible, tailor that cap according to the user cohort.
• Use a splash screen to inform the user.
  • Refer to the section on splash screens in “Best practices” above.

Using an app open ad

To ensure your app open ad is ready when the user brings your application to the foreground, you need to preload an app open ad. Implement a utility class to make ad requests before you need to show your ad. Create a method that shows an ad if ready, and call it when the user brings the app to the foreground.

Your app then attempts to show an ad on app open, or loads an ad if one is not preloaded.

Listen for app foregrounding events

Your app can override the OnApplicationPause method to listen for app-launch and app-foregrounding events. It can use this method to show the ad.

Cold starts and loading screens

There is a delay between when you request an ad and when you receive an ad to show. If you do not design your app well, the user may briefly see your app and then be surprised by an out-of-context ad. Prevent this bad user experience. You can handle cold starts by showing a loading screen before any app content, and then showing the ad after the loading screen. If your app shows any app content after the loading screen, do not show the ad.

If you place a loading screen under the app open ad, and that loading screen completes before the user dismisses the ad, you can dismiss your loading screen in the didHide method.

Example

These code examples assume that app open ads show only on “soft launch” after your app is suspended in memory. They do not include the splash/loading screen. The App Developer must handle the splash/loading screen—see Best practices.

Supported adapter versions

Fire OS Applications are not supported.